Articles
  • Effects of NH4Cl flux on the characteristics of yttrium oxide phosphor particles with a spherical shape 
  • Hye Young Koo, Seung Kwon Hong and Yun Chan Kang*
  • Department of Chemical Engineering, Konkuk University, 1 Hwayang-dong, Gwangjin-gu, Seoul 143-701, Korea
Abstract
High brightness Y2O3:Eu phosphor particles with a spherical shape and tine size were prepared by spray pyrolysis from spray solutions with polymeric precursors, a drying control chemical additive and ammonium chloride flux. The phosphor particles prepared from the spray solution with the ammonium chloride flux had a hollow and porous structure after post-treatment. However, the phosphor particles prepared from the spray solution with polymeric precursors, a drying control chemical additive and ammonium chloride flux had a spherical shape and filled inner structure after post-treatment. The optimum content of the NH4Cl flux showing the maximum photoluminescence intensity of the Y2O3:Eu phosphor particles was 6 wt%. The improvement of the photoluminescence intensity of the Y2O3:Eu phosphor particles by additions of ammonium chloride flux, polymeric precursors and a drying control chemical additive into the spray solution was 37%.

Keywords: phosphor; spray pyrolysis; flux material; photoluminescence

This Article

  • 2007; 8(4): 243-247

    Published on Aug 31, 2007