Articles
  • Preparation of zinc oxide films by an electrostatic spray deposition process 
  • Ju-Hyun Jeonga,b, Young-Sun Jeona,b, Kyung-Ok Jeona,b, Kyu-Seog Hwanga and Byung-Hoon Kimb,*
  • a Department of Applied Optics and Institute of Photoelectronic Technology, 864-1 Wolgye-dong, Gwangsan-gu, Gwangju 506-824, Korea b Department of Materials Science & Engineering, Chonnam National University, 300 Yongbong-dong, Buk-gu, Gwangju 500-757, Korea
Abstract
Highly transparent ZnO thin films were made by electrostatic spray deposition for 60 minutes-120 minutes at 400 degrees C on soda-lime-silica slide glass substrates. The peaks in the X-ray diffraction analysis could be indexed as from the structure of crystalline zinc oxide. From surface observations using a field emission scanning electron microscope and scanning probe microscope, the surface morphology of the films was found to depend chiefly on depositing time. All the films exhibit a high transmittance (>80%) in the visible region, except for the film deposited for 120 minutes. The band gap values of the ZnO films deposited for various time are found to be 3.25-3.27 eV.

Keywords: ZnO thin film; electrostatic spray deposition; surface morphology; transmittance

This Article

  • 2006; 7(1): 70-74

    Published on Mar 31, 2006