Articles
  • Dye-sensitized solar cells fabricated with size-selected titanium dioxide nanowires via an electrospinning method
  • Suk In Noh and Hyo-Jin Ahn*
  • Department of Materials Science & Engineering, Seoul National University of Science and Technology, Seoul, 139-743, Korea
Abstract
Two types of size-selected titanium dioxide (TiO2) nanowires (NWs) have been successfully synthesized via an electrospinning method and their structural and photovoltaic features investigated for use as a photoelectrode in dye-sensitized solar cells (DSSCs). Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) results show that two types of size-selected TiO2 NWs, which are made of anatase and rutile phases, have average diameters of ~100 nm and ~30 nm. Photocurrent-voltage curves show that the TiO2 NW photoelectrodes fabricated with a ~30 nm diameter exhibit a superior short-circuit current density of 10.86 mA/cm2 and a cell efficiency of 3.93%, for an area of 0.196 cm2 compared to those fabricated with a ~100 nm diameter, which is attributed to the increased specific surface area that allows for a higher rate of dye adsorption.

Keywords: Electrospinning, TiO2, Nanowires, Photovoltaic studies, Dye-sensitized solar cells.

This Article

  • 2012; 13(S1): 1-5

    Published on Aug 31, 2012