Articles
  • Consolidation and mechanical properties of nanostructured (Mo,Ti)Si2 from mechanically activated powder by high frequency induction heated sintering
  • Na-Ra Parka, In-Yong Koa, Jung-Mann Dohb, Jin-Kook Yoonb and In-Jin Shona,*
  • a Division of Advanced Materials Engineering, the Research Center of Advanced Materials Development, Chonbuk National University, 664-14 Deokjin-dong 1-ga, Deokjin-gu, Jeonju, Jeonbuk 561-756, Republic of Korea b Advanced Fuctional Materials Research Center, Korea Institute of Science and Technology, PO Box 131, Cheongryang, Seoul 130-650, Republic of Korea
Abstract
A dense nanostructured (Mo,Ti)Si2 compound was sintered by the high frequency induction heating method within 2 minutes from mechanically activated powder of Mo, Ti and Si. A highly-dense (Mo,Ti)Si2 compound was produced under simultaneous application of a 80 MPa pressure and the induced current. The mechanical properties and microstucture were investigated.

Keywords: (Mo,Ti)Si2, Mechanical properties, Sintering, Nanostructured materials.

This Article

  • 2011; 12(6): 660-663

    Published on Dec 31, 2011