Articles
  • Synthesis, characterization, and machinability of copper matrix composites reinforced with micro and nano-sized Si3N4 and AlN particles

  • Harikishore Sa,* and Mathalai Sundaram Cb

  • aAssistant Professor and Corresponding Author, Department of Mechanical Engineering, Nadar Saraswathi College of Engineering and Technology, Theni - 625531, Theni District, Tamil Nadu, India
    bProfessor, Department of Mechanical Engineering, Nadar Saraswathi College of Engineering and Technology, Theni - 625531, Theni District, Tamil Nadu, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. C.A. León-Patino, G. Rodríguez-Ortiz, and E.A. Aguilar-Reyes, Mater. Des. 54 (2014) 845-853.
  •  
  • 2. C. Real and F.J. Gotor, Heliyon 5[2] (2019) e01227.
  •  
  • 3. M.R. Akbarpour and S. Alipour, Ceram. Int. 43[6] (2017) 13364-13370.
  •  
  • 4. M.R. Akbarpour, H.M. Mirabad, F. Gazani, I. Khezri, A.A. Chadegani, A. Moeini, and H.S. Kim, J. Mater. Res. Technol. 27 (2023) 1317-1349.
  •  
  • 5. Y.F. Yan, S.Q. Kou, H.Y. Yang, S.L. Shu, F. Qiu, Q.C. Jiang, and L.C. Zhang, Int. J. Extreme Manuf. 5[3] (2023) 032006.
  •  
  • 6. D.-W. Shin and H. Guo, J. Ceram. Process. Res. 6[3] (2005) 263-265.
  •  
  • 7. T. Jiang, H. Jin, Z. Jin, J. Yang, and G. Qiao, J. Ceram. Process. Res. 10[1] (2009) 113-116.
  •  
  • 8. E. Şap, Ü.A. Usca, and M. Uzun, J. Braz. Soc. Mech. Sci. Eng. 44[9] (2022) 399.
  •  
  • 9. E. Uhlmann, S. Piltz, and K. Schauer, J. Mater. Process. Technol. 167[2-3] (2005) 402-407.
  •  
  • 10. F. Granados-Correa, J.L. Iturbe-García, and J. Bonifacio-Martínez, J. Ceram. Process. Res. 20[6] (2019) 597-602.
  •  
  • 11. J.-M. Lee, B.-I. Kim, J.-H. Lee, K.-H. Kim, and M.-P. Chun, J. Ceram. Process. Res. 14[6] (2005) 707-711.
  •  
  • 12. K.H. Hamzah, A.H. Abdulhussein, and M.N. Yasir, Metall. Mater. Eng. 30[2] (2024) 92-104.
  •  
  • 13. M.A. Ahmed, W.M. Daoush, and A.E. El-Nikhaily, Adv. Mater. Res. 5[3] (2016) 131-140.
  •  
  • 14. M. Kida, M. Bahraini, J.M. Molina, L. Weber, and A. Mortensen, Mater. Sci. Eng. A 495[1-2] (2008) 197-202.
  •  
  • 15. M.S. Kang, K.H. Shin, D.W. Kim, S.J. Kim, T. Tran, and M.J. Kim, J. Ceram. Process. Res. 18[12] (2017) 848-853.
  •  
  • 16. M. Zhang, L. Liu, S. Liang, and J. Li, Met. Mater. Int. 26[10] (2020) 1585-1595.
  •  
  • 17. P. Kumaravel, K.V. Raja, and P. Suresh, J. Ceram. Process. Res. 24[3] (2023) 569-577.
  •  
  • 18. T. Joyeux, J. Jarrige, J.C. Labbe, and J.P. Lecompte, Key Eng. Mater. 206 (2002) 555-558.
  •  
  • 19. V. Muthusamy and T.R. Kumar, J. Ceram. Process. Res. 26[3] (2025) 418-431.
  •  
  • 20. V.N. Gaitonde, S.R. Karnik, M. Faustino, and J.P. Davim, Int. J. Refract. Met. Hard Mater. 28[2] (2010) 221-227.
  •  
  • 21. W. Węglewski, P. Pitchai, M. Chmielewski, P.J. Guruprasad, and M. Basista, Int. J. Heat Mass Transf. 188 (2022) 122633.
  •  
  • 22. X. Cao, J. Duan, C. Wang, P. Jin, Y. Yang, and J. Zhang, Ceram. Int. 50[5] (2024) 7366-7373.
  •  
  • 23. X. Li, Q. Zhang, W. Lou, F. Li, J. Liang, and S. Gu, Coatings 13[12] (2023) 2093.
  •  
  • 24. X.M. Cao, J. Duan, C. Wang, P. Jin, Y. Yang, and J. Zhang, Mater. Today Commun. 38 (2024) 107722.
  •  
  • 25. Y. Jiang, L. Xiao, P. Zhai, F. Li, Y. Li, Y. Zhang, Q. Zhong, Z. Cai, S. Liu, and X. Zhao, Surf. Coat. Technol. 456 (2023) 129264.
  •  
  • 26. Y.J. Joo, J.W. Kim, K.B. Shim, and C.J. Kim, J. Ceram. Process. Res. 19[4] (2018) 342-346.
  •  
  • 27. A. Kalemtas, G. Arslan, P. Kayab, S. Turan, and F. Kara, J. Ceram. Process. Res. 19[2] (2018) 119-125.
  •  
  • 28. C.-H. Yang, C.-N. Yang, and Y.-C. Lee, J. Ceram. Process. Res. 18[9] (2017) 628-633.
  •  
  • 29. F. Ali, B.S. Park, and J.S. Kwak, J. Ceram. Process. Res. 14[4] (2013) 529-534.
  •  
  • 30. J.-M. Lee, B.-I. Kim, K.-H. Kim, and M.-P. Chun, J. Ceram. Process. Res. 14[6] (2013) 707-711.
  •  

This Article

  • 2025; 26(4): 680-689

    Published on Aug 31, 2025

  • 10.36410/jcpr.2025.26.4.680
  • Received on May 29, 2025
  • Revised on Jul 20, 2025
  • Accepted on Jul 24, 2025

Correspondence to

  • Harikishore S

  • Assistant Professor and Corresponding Author, Department of Mechanical Engineering, Nadar Saraswathi College of Engineering and Technology, Theni - 625531, Theni District, Tamil Nadu, India
    Tel : +91 9677406940

  • E-mail: harikishoreidea@gmail.com