Articles
  • A grey fuzzy approach based machining process parameters optimization for Al 6063 alloy

  • P. Saravana Kumara,*, Sujit Kumarb, S. Pradeepc, Tushar Yashawant Badgujard, B. Krishnavenie, G. Mahendranf, Dhivakar Poosapadig, M. Premalathah, G.S.V. Seshu Kumari and K.K. Arunj

  • aDepartment of Mechanical Engineering, University College of Engineering, Arni, Tamil Nadu, India
    bDepartment of Electrical and Electronics Engineering, Amrita School of Engineering, Bengaluru, India
    cDepartment of Electronics and Communication Engineering, S.A Engineering College, Tamil Nadu, India
    dDepartment of Mechanical Engineering, Late G. N. Sapkal College of Engineering, Nashik, Maharashtra, India
    eDepartment of Mathematics, Aditya University, Surampalem, Andhra Pradesh, India
    fDepartment of Mechanical Engineering, Chennai Institute of Technology, Chennai, Tamil Nadu, India
    gLead Engineer, Quest Global North America, Windsor, USA
    hDepartment of Mathematics, VelTech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, Tamil Nadu, India
    iDepartment of Mechanical Engineering, SRKR Engineering College, Andhra Pradesh, India
    jDepartment of Mechanical Engineering, Kumaraguru College of Technology, Tamilnadu, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. I. Arbizu and C.J. Luis Perez, J. Mater. Process. Technol. 143 (2003) 390-396.
  •  
  • 2. B. Balamugundan, L. Karthikeyan, and V.S. Senthilkumar, Procedia Eng. 38 (2012) 1276-1285.
  •  
  • 3. P.G. Benardos and G.C. Vosniakos, Int. J. Mach. Tools Manuf. 43 (2003) 833-844.
  •  
  • 4. R. Bobbili, V. Madhu, and A.K. Gogiz, Eng. Sci. Technol. Int. J. 18 (2015) 720-726.
  •  
  • 5. M.A. Câmara, A.M. Abrão, J.C.C. Rubio, B.S. Godoy, and S. Cordeiro, Precis. Eng. 46 (2016) 377-382.
  •  
  • 6. Y.M. Chiang and H.H. Hsin, Comput. Ind. Eng. 56 (2009) 648-661.
  •  
  • 7. F.B. De Oliveira, A.R. Rodrigues, R.T. Coelho, and A.F. De Souza, Int. J. Mach. Tools Manuf. 89 (2015) 39-54.
  •  
  • 8. M. Gupta and S. Kumar, Eng. Sci. Technol. Int. J. 18 (2015) 70-81.
  •  
  • 9. M. Jamshaid, H. Jaffery, L. Ali, M. Khan, K. Alam, R. Ahmed, and M. Rehman, in Proceedings of the 11th International Conference on Manufacturing Research, September 2013 (Cranfield University Press, 2013), pp. 245-250.
  •  
  • 10. Y. Javadi, S. Sadeghi, and M.A. Najafabadi, Mater. Des. 55 (2014) 27-34.
  •  
  • 11. H.U. Lee, D.W. Cho, and K.F. Ehmann, J. Manuf. Sci. Eng. 130 (2008) 031102.
  •  
  • 12. K. Lee, S. Kim, C.O. Kim and T. Park, J. Artif. Soc. Soc. Simul. 16[1] (2013) 3.
  •  
  • 13. I. Maher, L.H. Ling, A.A.D. Sarhan, and M. Hamdi, IFAC-Pap. Online 48[1] (2015) 105-110.
  •  
  • 14. S.B. Roshan, M.B. Jooibari, R. Teimouri, G.A. Ahmadi, M.F. Naghibi, and H. Sohrabpoor, Int. J. Adv. Manuf. Technol. 69 (2013) 1803-1818.
  •  
  • 15. P.K. Sahu, K. Kumari, S. Pal, and S.K. Pal, Adv. Manuf. 4 (2016) 237-247.
  •  
  • 16. R. Thirumalai, M. Seenivasan, and K. Panneerselvam, Mater. Today Proc. 45[2] (2020) 267-272.
  •  
  • 17. R. Thirumalai, J.S. Senthilkumaar, P. Selvarani, and S. Ramesh, Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. 227[9] (2012) 1889-1897.
  •  
  • 18. H. Weule, V. Hüntrup, and H. Tritschler, CIRP Ann. 50 (2001) 61-64.
  •  
  • 19. M. Kumar, S.K. Tamang, D. Devi, M. Dabi, K.K. Prasad, and R. Thirumalai, J. Ceram. Process. Res. 23[3] (2022) 373-382.
  •  
  • 20. R.K. Maurya, M.S. Niranjan, and N.K. Maurya, Int. J. Eng. Technol. 7 (2018) 447-453.
  •  
  • 21. V. Palanivel, G. Kumaresan, and G.K. Arunachalam, Environ. Prog. Sustainable Energy 41[2] (2022) e13740.
  •  
  • 22. Seenivasan Murugesan, Venugopal Thangamuthu, Rohokale Milind Shivaji, and Suresh Kumar R., J. Ceram.Process Res. 23[3] (2022) 367-372.
  •  
  • 23. Zhongyu Liang, Yabo Liu, and Nan Hu, J. Ceram. Process Res. 24[5] (2023) 802-806.
  •  

This Article

  • 2025; 26(3): 502-506

    Published on Jun 30, 2025

  • 10.36410/jcpr.2025.26.3.502
  • Received on Apr 8, 2025
  • Revised on May 26, 2025
  • Accepted on Jun 2, 2025

Correspondence to

  • P. Saravana Kuma

  • Department of Mechanical Engineering, University College of Engineering, Arni, Tamil Nadu, India
    Tel : 04173244400

  • E-mail: psk.ucearni@gmail.com