Articles
  • Mixed alkali effect on the thermal properties of SiO2-B2O3-ZnO-K2O-Na2O glass system

  • Sungmin Son and Seunggu Kang*

  • Department of Advanced Material Engineering, Kyonggi University, Suwon, Kyonggi-do 16227, South Korea

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. M. Harikarana, P. Kulanthaivelb, A.R. Krishnarajac, and P.C. Murugand, J. Ceram. Process. Res. 24[2] (2023) 266-273.
  •  
  • 2. S. Shanmughana, S.K. Kaliyannanb, S. Marasamyc, and P. Thiyagarajand, J. Ceram. Process. Res. 24[1] (2023) 111-119.
  •  
  • 3. S. Janania, G.S. Rampradheepb, P. Kulanthaivelc, and P.C. Murugand. J. Ceram. Process. Res. 23[6] (2022) 884-891.
  •  
  • 4. D. Hülsenberg, A. Harnisch, and A. Bismarck, in “Microstructuring of Glasses” (Springer Berlin Heidelberg, 2008) p. 57-69.
  •  
  • 5. W. Höland and G.H. Beall, in “Glass-Ceramic Technology” (John Wiley & Sons, Inc., 2012) p. 38-74.
  •  
  • 6. T.W. Ha and S.G. Kang, J. Ceram. Process. Res. 23[2] (2022) 237-242.
  •  
  • 7. C.H. Jeong, M.S. Yeo, and K.W. Kim, J. Asian Archit. Build. Eng. 14[3] (2015) 717-724.
  •  
  • 8. R. Tafakkori and A. Fattahi, Sustain. Energy Technol. Assess. 43 (2021) 100919.
  •  
  • 9. S. Memon, in “Design, fabrication and performance analysis of vacuum glazing units fabricated with low and high temperature hermetic glass edge sealing materials” (PhD thesis, Loughborough University, 2013) p. 6-34.
  •  
  • 10. I. Pérez-Grande, J. Meseguer, and G. Alonso, Appl. Therm. Eng. 25[17-18] (2005) 3163-3175.
  •  
  • 11. B.P. Jelle, S.E. Kalnæs, and T. Gao, Energy Build. 96 (2015) 329-356.
  •  
  • 12. S.J. Robinson and R.E. Collins, in Proceedings of the ISES World Congress, September 1989, edited by L. Broman and G. Eriksson (Int. Solar Energy Soc. 1989) p. 1.
  •  
  • 13. A. Zoller, in “Hohle Glasscheibe” (Deutsches Reich Patents Nr. 387655, 1913) p. 1.
  •  
  • 14. H. Riedel, S. Mokdad, I. Schulz, C. Kocer, P.L. Rosendahl, J. Schneider, M.A. Kraus, and M. Drass, Automation in Constr. 135 (2022) p. 104144.
  •  
  • 15. K. Swimm, H. Weinläder, and H-P. Ebert, Int. J. Thermophys 30 (2009) p. 934-948.
  •  
  • 16. F. Zoller, in “Hollow pane of glass” (German Patent 387655, 1924) p. 1.
  •  
  • 17. O. Kaygili, F. Yakuphanoglu, and C. Tatar, J. Ceram. Process. Res. 17[8] (2016) 881-884.
  •  
  • 18. F. Heydari, A. Maghsoudipoura, M.O. Shabania, Z. Hamnabardb, and S. Farhangdousta, J. Ceram. Process. Res. 15[1] (2014) 35-43.
  •  
  • 19. R. Souaga, N. Kamelb, D. Moudirb, Y. Mouhebb, and F. Aouchicheb, J. Ceram. Process. Res. 23[3] (2022) 304-311.
  •  
  • 20. H.J. Jeong, D.W. Jeon, J.H. Kim, Y. Lee, M. Lee, J. Hwang, H. Park, H. Lim, J. Lee, T. Park, and D. Shin, J. Ceram. Process. Res. 17[7] (2016) 694-698.
  •  
  • 21. O.P. Thakur, D. Kumara, O. Parkasha, and L. Pandeyb, J. Ceram. Process. Res. 5[2] (2004) 106-113.
  •  
  • 22. J.O. Isard, J. Non-Cryst. Solids. 1[3] (1969) 235-261.
  •  
  • 23. C.J. Wilkinson, A.R. Potter, R.S. Welch, C. Bragatto, Q. Zheng, M. Bauchy, M. Affatigato, S.A. Feller, and J.C. Mauro, J. Phys. Chem. B. 123[34] (2019) 7482-7489.
  •  
  • 24. D.E. Day, J. Non-Cryst. Solids. 21[3] (1976) 343-372.
  •  
  • 25. X. Ma, Y. Xu, J. Cheng, S. Sun, Y. Chen, X. Wang, W. Chen, S. Chen, and L. Hu, Materials (Basel). 15[21] (2022) 7439.
  •  
  • 26. M.S. Bødker, R.E. Youngman, J.C. Mauro, and M.M. Smedskjaer, J. Phys. Chem. B. 124[45] (2020) 10292-10299.
  •  
  • 27. J. Kjeldsen, M.M. Smedskjaer, J.C. Mauro, and Y. Yue, J. Non-Cryst. Solids. 406[15] (2014) 22-26.
  •  
  • 28. K. Baral, A. Li, and W.Y. Ching, J. Phys. Chem. A. 121[40] (2017) 7697-7708.
  •  
  • 29. A. Rodrigues, S. Fearn, and M. Vilarigues, J. Am. Ceram. Soc. 102[12] (2019) 7278-7287.
  •  
  • 30. M.F. Dilmore, D.E. Clark, and L.L. Hench, J. Am. Ceram. Soc. 61[9-10] (1978) 439-443.
  •  
  • 31. W. Zhifang, Z. Nai, M. Bo, and S. Zhongxin, J. Non-Cryst. Solids. 84[1-3] (1986) 468-476.
  •  
  • 32. X. Wang, S. Fagerlund, J. Massera, B. Södergård, and L. Hupa, J. Mater. Sci. 52 (2017) 8986-8997.
  •  
  • 33. Y. Onodera, Y. Takimoto, H. Hijiya, T. Taniguchi, S. Urata, S. Inaba, S. Fujita, I. Obayashi, Y. Hiraoka, and S. Kohara, NPG Asia Mater. 11 (2019) 75-85.
  •  
  • 34. B. Ryu, in “Introduction to Glass Engineering” (Pusan National University Press, 2017) p. 78
  •  
  • 35. J. Shen, D.J. Green, J. Non-Cryst. Solids. 344[1-2] (2004) 66-72.
  •  
  • 36. H. Lammert and A. Heuer, Phys. Rev. B. 72[21] (2005) 214202.
  •  
  • 37. W. Kingery, H.K. Bowen, and D.R. Uhlmann, in “Introduction to ceramics” (John wiley & sons, 1976) p. 152.
  •  
  • 38. A. Fluegel, Eur. J. Glass Sci. Technol. 48[1] (2007) 13-30.
  •  
  • 39. F. Iqbal, S. Kim, H. Yie, Y. Kim, and H. Kim, Ceram. Int. 42[8] (2016) 10393-10398.
  •  
  • 40. A.A. El-Moneim, Mater. Chem. Phys. 52 (1998) 36-40.
  •  
  • 41. K. Greene, M.J. Pomeroy, S. Hampshire, and R. Hill, J. Non-Cryst. Solids 325[1-3] (2003) 193-205.
  •  
  • 42. J.E. Shelby, J. Am. Ceram. Soc. 66 (1983) 225-227.
  •  
  • 43. Y. Onodera, S. Kohara, H. Masai, A. Koreeda, S. Okamura, and T. Ohkubo, Nat. Commun. 8 (2017) 15449.
  •  
  • 44. K.V. Shah, M. Goswami, D.K. Aswal, V.K. Shrikhande, S.K. Gupta, and G.P. Kothiyal, J. Therm. Anal. Calorim. 89 (2007) 153157.
  •  
  • 45. S. Sukenaga, T. Endo, T. Nishi, H. Yamada, K. Ohara, T. Wakihara, K. Inoue, S. Kawanishi, H. Ohta, and H. Shibata, Front. Mater. 8 (2021) 753746.
  •  
  • 46. S.S. Sørensen, E.J. Pedersen, F.K. Paulsen, I.H. Adamsen, J.L. Laursen, S. Christensen, H. Johra, L.R. Jensen, and M.M. Smedskjaer, Appl. Phys. Lett. 117[3] (2020) 031901.
  •  
  • 47. S.S. Sørensena, M.S. Bødker, H. Johra, R.E. Youngman, S.L. Logunov, M. Bockowski, S.J. Rzoska, J.C. Mauro, and M.M. Smedskjaer, J. Non-Cryst. Solids. 557 (2021) 120644.
  •  

This Article

  • 2023; 24(6): 1042-1049

    Published on Dec 31, 2023

  • 10.36410/jcpr.2023.24.6.1042
  • Received on May 24, 2023
  • Revised on Dec 12, 2023
  • Accepted on Dec 12, 2023

Correspondence to

  • Seunggu Kang

  • Department of Advanced Material Engineering, Kyonggi University, Suwon, Kyonggi-do 16227, South Korea
    Tel : +82-31-249-9767 Fax: +82-31-249-9774

  • E-mail: sgkang@kyonggi.ac.kr