Articles
  • Investigation of microstructure and wear properties of AISI M2 high speed steel nozzles coated with different hard coatings (TiN, CrN, AlCrN, AlTiN and AlTiN) by PVD method

  • Hediye Aydina,* and M. Ahmet Söylerb,c

  • aDepartment of Metallurgy and Material Engineering, Kütahya Dumlupınar University, 43100 Kütahya, Turkey
    bNG Machinery, Kütahya 1th. Organized Industrial Zone, 1th. Street No:13, Kütahya, Turkey
    cDepartment of Mechanical Engineering Kütahya Dumlupınar University, 43100 Kütahya, Turkey

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Din 1.3343 High Speed Tool Steel, accessed 17 December 2020.
  •  
  • 2. M. Stoicanescu, E. Ene, A. Zara, I. Giacomelli, and A. Crisan, Proc. Technol. 22 (2016) 161-166.
  •  
  • 3. F. Klocke and A. Kuchle, in “Fundamentals of Cutting” (Manuf. Process. 1, 2011) p. 39-94.
  •  
  • 4. K. Wang, Y.J. Kim, Y. Hayashi, C.G. Lee, and B.H. Koo, J. Ceram. Process. Res. 10[4] (2009) 562-566.
  •  
  • 5. S.C. Santos, W.F. Sales, F.J. da Silva, S.D. Franco, and M.B. da Silva, Surf. Coat. Technol. 184[2-3] (2004) 141-148.
  •  
  • 6. G.M. Uddin, A.A. Khan, M. Ghufran, Z.-R. Tahir, M. Asim, M. Sagheer, M. Jawad, J. Ahmad, M. Irfan, and B. Waseem, Adv. Mech. Eng. 10[9] (2018) 1-10.
  •  
  • 7. Q. An, C. Wang, J. Xu, P. Liu, and M. Chen, Int. J. Refract. Met. Hard Mater. 43 (2014) 94-101.
  •  
  • 8. K. Murai, Y. Watanabe, Y. Saito, T. Nakayama, H. Suematsu, W. Jiang, and K. Niihara, J. Ceram. Process. Res. 8[2] (2007) 114.
  •  
  • 9. J.H. Huang, C.Y. Hsu, S.S. Chen, and G.P. Yu, Mater. Chem. Phys. 77[1] (2003) 14-21.
  •  
  • 10. Y. Kayali, Prot. Met. Phys. Chem. Surf. 50[3] (2014) 412-419.
  •  
  • 11. G. Zheng, G. Zhao, X. Cheng, R. Xu, J. Zhao, and H. Zhang, Ceram. Int. 44[6] (2018) 6878-6885.
  •  
  • 12. K. Zhang, J. Deng, X. Guo, L. Sun, and S. Lei, Int. J. Refract. Met. Hard Mater.72 (2018) 292-305.
  •  
  • 13. J.L. Mo and M.H. Zhu, Wear. 267[5-8] (2009) 874-881.
  •  
  • 14. A. Liu, J. Deng, H. Cui, Y. Chen, and J. Zhao, Int. J. Refract. Met. Hard Mater.31 (2012) 82-88.
  •  
  • 15. S.M.M. Shafieia, M. Divandarib, S.M.A. Boutorabic, and R. Naghizadehd, J. Ceram. Process. Res. 15[5] (2014) 308-311.
  •  
  • 16. Z. Sagdoldina, B. Rakhadilov, M. Skakov, and O. Stepanova, Mater. Test.61[4] (2019) 304-308.
  •  
  • 17. W. Yongqiang, Z. Xiaoya, J. Zhiqiang, and T. Xiubo, Int. J. Adv. Manuf. Technol.96 (2018) 1677-1683.
  •  
  • 18. T. Hryniewicz, R. Rokicki, and K. Rokosz, Surf. Coat. Technol. 203[10-11] (2009) 1508-1515.
  •  
  • 19. M.S. Kang, J. Ceram. Process. Res. 13[S1] (2012) 52-58.
  •  
  • 20. P.H. Mayrhofer, C. Mitterer, L. Hultman, and H. Clemens, Prog. Mater. Sci. 51[8] (2006) 1032-1114.
  •  
  • 21. R.D. Torres, P.C. Soares, C. Schmitz, and C.J.M. Siqueira, Surf. Coat. Technol. 205[5] (2010) 1381-1385.
  •  
  • 22. F. Cai, Q. Yang, X. Huang, and R. Wei, J. Mater. Eng. Perform. 19 (2010) 721-727.
  •  
  • 23. A. Gilewicz, R. Jedrzejewski, P. Myslinski, and B. Warcholinski, J. Mater. Eng. Perform. 28 (2019) 1522-1531.
  •  
  • 24. T. Polcar and A. Cavaleiro, Surf. Coat. Technol. 205[2] (2011) 107-110.
  •  
  • 25. J. Doherty, “Ceramic Handbooks: “Porcelain” (University of Pennsylvania Press, 2002) p. 17-95.
  •  
  • 26. S.Y.R. Lopez, J.S. Rodriguez, and S.S. Sueyoshi, J. Ceram. Process. Res. 12[3] (2011) 228-232.
  •  
  • 27. T. Boyraz and A. Akkuş, J. Ceram. Process. Res. 22[2] (2021) 226-231.
  •  
  • 28. H.X. Lu, M. He, Y.Y. Liu, J.F. Guo, L.W. Zhang, D.L. Chen, and R. Zhang, J. Ceram. Process. Res. 12[5] (2011) 588-591.
  •  
  • 29. P. Rado, “An Introduction to the Technology of “Pottery” (Second Edition, Pergamon Press, 1988) p. 95.
  •  
  • 30. N. Vidakis, A. Antoniadis, and N. Bilalis, J. Mater. Process. Technol. 143-144 (2003) 481-485.
  •  
  • 31. M. Öteyaka, in “Investigation of Microstructural Characteristics and Cutting Performance of Hardened Cutting Tools from DIN 115CrV3 Steel Coated With TiN And CrN”, (Ph.D. thesis submitted to Dumlupınar University Journal of the Institute of Science, 2013.)
  •  
  • 32. M. Skakov, B. Rakhadilov, M. Scheffler, and E. Batyrbekov, Mater. Test. 57[4] (2015) 360-364.
  •  
  • 33. B. Navinšek and P. Panjan, Surf. Coat. Technol. 59[1-3] (1993) 244-248.
  •  
  • 34. A.Y. Adesina, Z. Iqbal, F.A. Al-Badour, and Z.M. Gasem, J. Mater. Res. Technol. 8[1] (2019) 436-446.
  •  
  • 35. A.Y. Adesina, G. Zuhair, and A.M. Kumar, Mater. Corros. 70[9] (2019) 1601-1616.
  •  
  • 36. A.Y. Adesina, Z.M. Gasem, and A.S. Mohammed, Arab. J. Sci. Eng. 44 (2019) 10355-10371.
  •  
  • 37. S.C. Vettivel, R. Jegan, J. Vignesh, and S. Suresh, Surf. Interfaces 6 (2017) 1-10.
  •  
  • 38. G. Rasool and M.M. Stack, Tribol. Int. 74 (2014) 93-102.
  •  
  • 39. L. Aihua, D. Jianxin, C. Haibing, C. Yangyang, and Z. Jun, Int. J. Refract. Met. Hard Mater.31 (2012) 82-88.
  •  

This Article

  • 2023; 24(5): 796-801

    Published on Oct 31, 2023

  • 10.36410/jcpr.2023.24.5.796
  • Received on May 24, 2023
  • Revised on Aug 2, 2023
  • Accepted on Aug 3, 2023

Correspondence to

  • Hediye Aydin

  • Department of Metallurgy and Material Engineering, Kütahya Dumlupınar University, 43100 Kütahya, Turkey
    Tel : +90 274 443 4272

  • E-mail: hediye.aydin@dpu.edu.tr