Articles
  • Experimental analysis of AA7475/ZrC/Al2O3 hybrid composites by taguchi method

  • B. Somasundarama,*, K.T. Anandb, D. Kirubakaranc, P. Ganeshand, Sathish Kannane, A.H. Seikhf and A. Ghoshg

  • aSchool of Mechanical Engineering, REVA University, Bangalore, Karnataka 560064, India
    bDepartment of Mechanical Engineering, Panimalar Polytechnic College, Chennai, Tamil Nadu 600029, India
    cDepartment of Electrical and Electronics Engineering, St. Joseph's Institute of Technology, Chennai, Tamil Nadu 600119, India
    dDepartment of Mechanical Engineering, Sri Eshwar College of Engineering, Coimbatore 641202, Tamil Nadu, India
    eDepartment of VLSI Microelectronics, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai - 602105, Tamilnadu, India
    fMechanical Engineering Department, College of Engineering, King Saud University, Riyadh 11421, Saudi Arabia
    gDepartment of Applied Science, University of Quebec at Chicoutimi, Saguenay, QC G7H 2B1, Canada

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. V. Mohanavel and M. Ravichandran. Mater. Res. Express. 6[10] (2019) 106557.
  •  
  • 2. V. Mohanavel and R. Manickam, Mater. Testing 61[6] (2019) 554-558.
  •  
  • 3. D. Srinivasan, M. Meignanamoorthy, A. Gacem, M. Vinayagam, T. Sathish, M. Ravichandran, S. Suresh Kumar, M.H. Abdellattif, and H. Lenin Allasi, J. of Nanomater. 2022 (2022) 12.
  •  
  • 4. K. Velavan, B. Mohan, G. Anbuchezhiyan, and N. Senthilkumar, Silicon. 13[10] (2021) 3639-3647.
  •  
  • 5. B.N. Sharath and C.V. Venkatesh, Tribologia. 38[1-2] (2021) 35-46.
  •  
  • 6. K. Raja, V.S. Chandra Sekar, V. Vignesh Kumar, T. Ramkumar, and P. Ganeshan, Arab. J. Sci. Eng. 45 (2020) 9481-9495.
  •  
  • 7. T. Sathish, N. Sabarirajan, and R. Saravanan, J. Mater. Res. Technol. 14 (2021) 1494-1503.
  •  
  • 8. M. Hülya Kaftelen, L. Öveçoğlu, H. Henein, and H. Çimenoğlu, Mater. Sci. Eng. 527[21-22] (2010) 5930-5938.
  •  
  • 9. T. Wang, X. Zuo, Y. Zhou, J. Tian, and S. Ran, J. Mater. Res. Technol. 13 (2021) 1615-1627.
  •  
  • 10. J. Jung, et al., J. Alloys Compd. 862 (2021).
  •  
  • 11. T. Arunkumar, V. Pavanan, V.A. Murugesan, V. Mohanavel, and K. Ramachandran, Met. Mater. Int. 28[1] (2022) 145-154.
  •  
  • 12. R. Chandel, N. Sharma, and S.A. Bansal, Emergent Mater. 4[5] (2021) 1243-1257.
  •  
  • 13. F. Zok, S. Jansson, A. G. Evans, and V. Nardone, Metall Mater. Trans. 22 (1991) 2107-2117.
  •  
  • 14. M.D. Habibur Rahman and H.M. Mamun Al Rashed, Procedia Eng. 90 (2014) 103-109.
  •  
  • 15. J.P. Chen, L. Gu, and G.J. He, Adv. Manuf. 8 (2020) 279- 315.
  •  
  • 16. R. Manjunath, D. Kumar, and A. Kumar, J. Bio- Tribo- Corrosion. 7[3] (2021).
  •  
  • 17. A. Kareem, J.A. Qudeiri, A. Abdudeen, T. Ahammed, and A. Ziout, Mater. 14[1] (2021) 1-22.
  •  
  • 18. A. Haiter Lenin, S.C. Vettivel, T. Raja, Lulseged Belay, and S. Christopher Ezhil Singh, Surfaces and Interfaces. 10 (2018) 149-161.
  •  
  • 19. C.T. Guerrero, et al., Mater. Res. 25 (2022).
  •  
  • 20. V. Vignesh Kumar, K. Raja, V.S. Chandra Sekar, and T. Ramkumar, J. Braz. Soc. Mech. Sci. Eng. 41 (2019) 228.
  •  
  • 21. A. Kareem, J.A. Qudeiri, A. Abdudeen, T. Ahammed, and A. Ziout, Mater. 14[1] (2021) 175.
  •  
  • 22. K.K.S. Himanshu Kala, and M. Sandeep Kumar, Procedia Mater. Sci. 6 (2014) 1951-1960.
  •  
  • 23. C. Ramesh Kumar, S. Baskar, G. Ramesh, P. Gurusamy, and T. Maridurai, Metall. Res. Technol. 118[6] (2021) 614.
  •  
  • 24. T.S. Sachit, D.V. Kumar, R. Keshavamurthy, and G.S.P. Kumar, Mater. Today: Proc. 43 (2021) 2909-2914.
  •  
  • 25. C. Kar and B. Surekha, Mater. Res. Innov. 25[2] (2021) 67-75.
  •  
  • 26. L. Natrayan and M. Senthil Kumar, Mater. Today Commun. 25 (2020).
  •  
  • 27. C. Kishore Reddy, M.G. Krishna, K.S. Vikas, and P.G. Krishnaiah, Int. J. Mech. Prod. Eng. Res. Dev. 10[2] (2020) 505-514.
  •  
  • 28. B. Supriya Maharana and N. Suresh, Int. J. of Coal Preparation Utilization. 41[8] (2021) 539-553.
  •  
  • 29. N. Puneeth, J. Satheesh, V. Koti, P.G. Koppad, M.R. Akbarpour, and G.J. Naveen, Mater. Res. Express. 6[10] (2019).
  •  
  • 30. K.E. Aslani, K. Kitsakis, J.D. Kechagias, et al., SN Appl. Sci. 2 (2020) 1016.
  •  
  • 31. P. Pugalenthi, M. Jayaraman, and V. Subburam, Mater. Tehnol. 53[1] (2019) 49-55.
  •  
  • 32. M. Ravikumar, H.N. Reddappa, R. Suresh, and M. Gangadharappa, Mater. Today: Proc. 5[10] (2018) 22447-22453.
  •  
  • 33. B. NagarajaGanesh, B. Rekha, V. Mohanavel, and P. Ganeshan, J. Natural Fibers. 20 (2023) 1-11.
  •  
  • 34. B. Balasubramanian, K. Raja, V. Vignesh Kumar, and P. Ganeshan, Natural Prod. Res. 24 (2022) 1-0.
  •  

This Article

  • 2023; 24(4): 626-633

    Published on Aug 31, 2023

  • 10.36410/jcpr.2023.24.4.626
  • Received on Mar 3, 2023
  • Revised on Mar 29, 2023
  • Accepted on Apr 5, 2023

Correspondence to

  • B. Somasundaram

  • School of Mechanical Engineering, REVA University, Bangalore, Karnataka 560064, India
    Tel : +918248804240

  • E-mail: somasundaramb565@gmail.com