Articles
  • Study of dry friction characteristics of silicon nitride full ceramic ball bearing with PEEK-based cage

  • Jian Suna,b, Zhe Zhanga, Zhongxian Xiaa, Xin Fanga, Renyun Guana, Guangxiang Zhanga and Jinmei Yaoa,*

  • aSchool of Mechanical Engineering, Shenyang Jianzhu University, Shenyang 110168, China
    bState Key Laboratory of Tribology, Tsinghua University, Beijing 100084, China

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. H. Wen, J. Sun, and W. Chen, Int. Mater. Rev. 29 (2015) 6-14.
  •  
  • 2. M. Cao, X. Jin, and L. Chen, J. Ceram. Process Res. 4 (2021) 377-385.
  •  
  • 3. W. Zhang, X. Chen, and S. Yamashita, ACS Appl. Nano Mater. 4 (2021) 3159-3166.
  •  
  • 4. Z. Li, Y. Wang, and X. Cheng, ACS Appl. Mater. Interfaces 10 (2018) 2965-2975.
  •  
  • 5. N. Kovalev, Myshkin, Friction. 6 (2018) 143-155.
  •  
  • 6. M.D. Placette, S. Roy, D. White, S. Sundararajan, and C.J. Schwartz, Wear. 426-427 (2019) 1345-1353.
  •  
  • 7. Y. Qi, J. Gong, W. Cao, and W. Honggang, J. Wuhan Univ. Technol. Mater. Sci. Ed. 35 (2020) 87-98.
  •  
  • 8. A. Wang, S. Yan, and B. Lin, Friction. 5 (2017) 414-428.
  •  
  • 9. J. Ma, X. Qi, and Y. Dong, Tribol. Int. 120 (2018) 233-242.
  •  
  • 10. L. Guo, G. Zhang, and D. Wang, Composites, Part A. 102 (2017) 400-413.
  •  
  • 11. G. Theiler and T. Gradt, Wear. 269 (2010) 278-284.
  •  
  • 12. G. Jintang, Wear. 245 (2000) 100-106.
  •  
  • 13. H. Koike, K. Kida, K. Mizobe, X. Shi, S. Oyama, and Y. Kashima, Tribol. Int. 90 (2015) 77-83.
  •  
  • 14. H. Hyuga, M.I. Jones, K. Yoshida, N. Kondo, K. Hirao, and H. Kita, J. Ceram. Process Res. 10 (2009) 367-372.
  •  
  • 15. Y. Lu, J. Yang, and J.Q. Gao, J. Ceram. Process Res. 9 (2008) 657-660.
  •  
  • 16. S.H. Ahn and K.W. Nam, J. Ceram. Process Res. 17 (2016) 1046-1051.
  •  
  • 17. H. Xin, H. Shi, W. Chen, J.H. Jia, W.L. Yang, and Z.M. Jin, Ceram. Int. 45 (2019) 6296-6302.
  •  
  • 18. Z. Xia, Y. Wu, T. Ma, Z. Bao, J. Tian, J. Sun, and S. Li, Tribol. Int. 175 (2022) 107849.
  •  
  • 19. M. Yakout, M.G.A. Nassef, and S. Backar, J. Mech. Sci. Technol. 33 (2019) 2037-2042.
  •  
  • 20. M. Yakout, A. Elkhatib, and M.G.A. Nassef, J. Mech. Sci. Technol. 32 (2018) 91-99.
  •  
  • 21. F.B. Oswald, E.V. Zaretsky, and J.V. Poplawski, Tribol. Trans. 55 (2012) 245-265.
  •  
  • 22. E.V. Zaretsky, in “Rolling bearing life prediction, theory, and application” (Glenn Research Center Press, 2013) p. 8.
  •  
  • 23. B. Fang, J. Zhang, J. Hong, and K. Yan, Lubricants. 11 (2023) 44.
  •  
  • 24. S.J. Ma, Y.J. Yin, B. Chao, K. Yan, B. Fang, and J. Hong, Int. J. Mech. Sci. 245 (2023) 108098.
  •  
  • 25. W. Mingkai, K. Yan, Q. Tang, J. Guo, Y. Zhu, and J. Hong, Tribol. Int. 179 (2023) 108163.
  •  
  • 26. J. Wang, H. Zhao, and J. Li, J. Hunan Univ. Sci. Ed. 40 (2013) 46-51.
  •  
  • 27. G. Colas, A. Saulot, Y. Michel, T. Filleter, and A. Merstallinger, Lubricants. 9 (2021) 38.
  •  
  • 28. S. Von Goeldel, T. Reichenbach, F. König, L. Mayrhofer, G. Moras, G. Jacobs, and M. Moseler, Tribol. Lett. 69 (2021) 1-16.
  •  
  • 29. S. Deng, X. Li, J. Wang, and H. Teng, Chin. J. Mech. Eng. 47 (2011) 114-120.
  •  
  • 30. G. Yao, W. Wang, and J. Shen, Mater. Sci. Technol. 26 (2018) 59-65.
  •  
  • 31. Y. Zhu, J. Chen, L. Jiang, and H. Wang, Runhua Yu Mifeng. 40 (2015) 61-64.
  •  
  • 32. S. Bahadur, Wear. 245 (2000) 92-99.
  •  

This Article

  • 2023; 24(3): 541-553

    Published on Jun 30, 2023

  • 10.36410/jcpr.2023.24.3.541
  • Received on Feb 24, 2023
  • Revised on Apr 9, 2023
  • Accepted on Apr 25, 2023

Correspondence to

  • Jinmei Yao

  • School of Mechanical Engineering, Shenyang Jianzhu University, Shenyang 110168, China
    Tel : +86-188 0982 2007 Fax: 024-24694985

  • E-mail: yaojinmei06@126.com