Articles
  • Multi-response optimisation for turning of magnesium alloy with untreated and cryogenic treated carbide inserts by grey relational analysis

  • N. Ravikumara,*, R. Vijayanb and R. Viswanathanc

  • aDepartment of Mechanical Engineering, Kongunadu College of Engineering and Technology, Trichy, India
    bDepartment of Mechanical Engineering, Government College of Engineering, Bargur, India
    cDepartment of Mechanical Engineering, AVS Engineering College, Salem, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Y.K. Yang and C.J. Tzeng, Mater. Manuf. Process. 21[5] (2006) 489-494.
  •  
  • 2. X. Cao, M. Xiao, M. Jahazi, J. Fournier, and M. Alain, Mater. Manuf. Process. 23[4] (2008) 413-418.
  •  
  • 3. J.E. Gray and B. Luan, J. Alloy. Compd. 336 (2002) 88-113.
  •  
  • 4. H. Friedrich and S. Schumann, J. Mater. Process. Technol. 117[3] (2001) 276-281.
  •  
  • 5. Y. Chunmiao, H. Dezheng, L. Chang, and L. Gang, J. Hazardous Mater. 246 (2013) 283-290.
  •  
  • 6. N. Tomac, K. Tonnessen, and F.O. Rasch, CIRP Annals- Manuf. Technol. 40[1] (1991) 79-82.
  •  
  • 7. E.M. Rubio, María Villeta, Diego Carou, and Adolfo Saa, Int. J. Pre. Eng. Manuf. 15[5] (2014) 929-940.
  •  
  • 8. E.M. Rubio, J.L. Valencia, A.J. Saa, and D. Carou, Int. J. Prec Eng. Manuf. 14[6] (2013) 995-1001.
  •  
  • 9. A. Khan and K. Maity, J. Manuf. Process. 28 (2017) 272-284.
  •  
  • 10. T. Sreerama Reddy, T. Sornakumar, M. Venkatarama Reddy, and R. Venkatram, Int. J. Refract. Met. Hard Mater. 27[1] (2009) 181-185.
  •  
  • 11. K.H.W. Seah, M. Rahman, and K.H. Yong, Proc. Inst. Mech. Engineers, Part B: J Eng. Manuf. 217[1] (2003) 29-43.
  •  
  • 12. D. Mohan Lal, S. Renganarayanan, and A. Kalanidhi, Cryogenics 3 (2001) 149-155.
  •  
  • 13. Celik Osman Nuri, Sert Abdullah, Gasan Hakan, and Ulutan Mustafa, Int. J. Adv. Manuf. Technol. 95 (2018) 2989-2999.
  •  
  • 14. A.Y.L. Yong, K.H.W. Seah, and M. Rahman, Int. J. Mac. Tools & Manuf. 46 (2006) 2051-2056.
  •  
  • 15. S. Ramesh, R. Viswanathan, and S. Ambika, Measurement 78 (2016) 63-72.
  •  
  • 16. R. Viswanathan, S. Ramesh, and V. Subburam, Measurement 120 (2018) 107-113.
  •  
  • 17. R. Viswanathan, S. Ramesh, S. Maniraj, and V. Subburam, Measurement 159 (2020) 107800.
  •  
  • 18. S. Dinesh, V. Senthilkumar, P. Asokan, and D. Arulkirubakaran, Mater. Des. 87 (2015) 1030-1036.
  •  
  • 19. R.G. Deshpande and K.A. Venugopal, Mater. Today: Proc. 5 (2018) 1872-1878.
  •  
  • 20. U. Koklu and H. Coabn, J. Mat. Res. Tech. 9[3] (2020) 2870-2880.
  •  
  • 21. Xuhong Guo, Lijun Teng, Wei Wang, and Tingting Chen, Adv. Mater. Res. 102-104 (2012) 653-657.
  •  
  • 22. K. Gunasekaran, G. Pradeep Kumar, and R. Thanigaivelan, J. of New Mater. Electro. Sys. 24[1] (2021) 49-54.
  •  
  • 23. V. Sivalingam, Jie Sun, Bin Yang, Kai Liu, and Ramesh Raju, J. Manuf. Proc. 36 (2018) 188-196.
  •  
  • 24. K. Vadivel and R. Rudramoorthy, Int. J. Adv. Manuf. Technol. 42 (2009) 222-232.
  •  
  • 25. B.N. Sahoo, A. Mohanty, S. Gangopadhyay, and K. Vipindas, J. Manuf. Proc. 58 (2020) 819-831.
  •  
  • 26. N.A. Ozbek, J. Mat. Res. Tech. 9[4] (2020) 9442-9456.
  •  
  • 27. A. Cicek, I. Uygur, T. Kıvak, and N. Altan Ozbek, J. Manuf. Sci. Eng. 134 (2012) 1-6.
  •  
  • 28. M. Srinivasan, S. Ramesh, S. Sundaram, and R. Viswanathan, J. Ceram. Process. Res. 22[3] (2021) 345-355.
  •  
  • 29. N. Sivashankar, R. Viswanathan, K. Periasamy, R. Venkatesh, and S. Chandrakumar, Mater. Today: Proc. 37[2] (2021) 214-219.
  •  
  • 30. S. Maniraj and R. Thanigaivelan, Trans. Ind. Inst. Met. 72[12] (2019) 3057-3066.
  •  
  • 31. K.G. Saravanan, A. Sivapragasam, R. Prabu, and S. Maniraj, Mater. Today: Proc. 45 (2021) 1975-1978.
  •  
  • 32. J.U. Pillai, I. Sanghrajka, M. Shunmugavel, T. Muthuramalingam, M. Goldberg, and G. Littlefair, Measurement. 124 (2018) 291-298.
  •  
  • 33. M. Mia, A. Rifat, M.F. Tanvir, M.K. Gupta, M.J. Hossain, and A. Goswami, Measurement 129 (2018) 156-166.
  •  
  • 34. M. Mia, M. Al Bashir, M.A. Khan, and N.R. Dhar, Int. J. Adv. Manuf. Technol. 89[1-4] (2017) 675-690.
  •  
  • 35. E. Suneesh and M. Sivapragash, Measurement 168 (2021) 108345.
  •  
  • 36. S. Maniraj, R. Thanigaivelan, R. Kannan, N. Ramesh, and P. Raja, Mater. Today: Proc. 45 (2021) 2430-2434.
  •  
  • 37. A. Kanakaraj, R. Mohan, and R. Viswanathan J. Ceram. Process. Res. 23[3] (2022) 268-277.
  •  
  • 38. K. Periasamy, N. Sivashankar, R. Viswanathan, and J Balaji, J. Ceram. Process. Res. 23[3] (2022) 335-343.
  •  
  • 39. T. Tamilanban, T.S. Ravikumar, C. Gopinath, and S. Senthilrajan, J. Ceram. Process. Res. 22[6] (2021) 629-635.
  •  
  • 40. M. Shivaperumal, R. Thirumalai, S. Kannan, and K.S.S. Rao Yarrapragada, J. Ceram. Process. Res. 23[3] (2022) 404-408.
  •  
  • 41. R. Viswanathan, S. Ramesh, N. Elango, and D. Kamesh Kumar, Pert. J. Sci. Tech. 25[1] (2017) 255-262.
  •  

This Article

Correspondence to

  • N. Ravikumar

  • Department of Mechanical Engineering, Kongunadu College of Engineering and Technology, Trichy, India
    Tel : +91 9894160222

  • E-mail: suryakumar08@gmail.com