Articles
  • Experimental investigation of palm kernel fibre reinforced epoxy based composite

  • Senthil Kumar KMa, Thirumalai Ramanathanb,*, Seenivasan Murugesanc and Venugopal Thangamuthud

  • aAsso. Professor, Mechanical Engineering, Kumaraguru College of Technology, Coimbatore, India
    bProfessor, Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore, India
    cProfessor, Mechanical Engineering, KGISL Institute of Technology, Coimbatore, India
    dAsst. Professor, Mechanical Engineering, KGISL Institute of Technology, Coimbatore, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. O.H. Kwon and M. G. Jenkins, KSME Int. J. 16[9] (2002) 1093-1101.
  •  
  • 2. C. Elanchezhian, B.V. Ramnath, G. Ramakrishnan, M. Rajendrakumar, V. Naveenkumar, M.K. Saravanakumar, Mater. Today: Proc. 5[1] (2018) 1785–1790.
  •  
  • 3. W. Ouarhim, N. Zari, R. Bouhfid and A.E. Kacem Qaiss, in “Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites” (Woodhead Publishing, 2019) p.43-60.
  •  
  • 4. A. Shahzad, in “Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites” (Woodhead Publishing, 2019) p.215-239.
  •  
  • 5. P.K. Bajpai, K. Ram, L.K. Gahlot, V.K. Jha, Mater. Today: Proc. 5[2] (2018) 8699–8706.
  •  
  • 6. O. Osita, O. Ignatius, U. Henry, Int. J. Eng. Technol. 7 (2016) 68-77.
  •  
  • 7. N. Naresh, K. Rajasekhar, and P.V. Reddy, IOSR JMCE. 6[1] (2013) 102-111.
  •  
  • 8. A.I. Azmi, R.J. Lin, and D. Bhattacharyya, Int. J. Adv. Manuf. Technol. 64[1-4] (2013) 247-261.
  •  
  • 9. J.S. Pang, M.N.M. Ansari, O.S. Zaroog, M.H. Ali, and S.M. Sapuan, HBRC. J. 10[2] (2014) 138-144.
  •  
  • 10. V. Kavimani, K.S. Prakash, T. Thankachan, Compos. B. Eng. 167 (2019) 621-630.
  •  
  • 11. S. Gopalakrishnan, and N. Murugan, Compos. B. Eng. 43[2] (2012) 302-308.
  •  
  • 12. M. Seeman, G. Ganesan, R. Karthikeyan and A. Velayudham, Int. J. Adv. Manuf. Technol. 48[5-8] (2010) 613-624.
  •  
  • 13. M.P. Jenarthanan and R. Jeyapaul. Int. J. Eng. Sci. Technol. 5[4] (2013) 22-36.
  •  
  • 14. K. Palanikumar, S. Prakash and K. Shanmugam, Mater. Manuf. Process. 23[8] (2008) 858-864.
  •  
  • 15. C. R. Dandekar and Y. C. Shin, Int. J. Mach. Tools Manuf. 57 (2012) 102-121.
  •  
  • 16. R. Vinayagamoorthy, I.V. Manoj, G. Narendra Kumar, I. Sai Chand, G.V. Sai Charan Kumar and K. Suneel Kumar, J. Mech. Sci. Technol. 32[5] (2018) 2011-2020.
  •  
  • 17. G. Wu, and J.M. Yang, Model. Simul. Mater. Sci. Eng. 13[3] (2005) 413.
  •  
  • 18. L. Dvorkin, V. Zhitkovsky, Y. Ribakov, O. Bordiuzhenko and A. Stepanuk, Rev. Romana Mater. 49[3] (2019) 361-369.
  •  
  • 19. M. Srinivasan, S. Ramesh, S. Sundaram and R. Viswanathan, J. Ceram. Process. Res. 22[3] (2021) 345-355.
  •  
  • 20. Y.M. Kin, J.H. Kwon, S.H. Kang, J.H. Jung, P.J. Kim and K.J. Lim, J. Ceram. Process. Res. 13[S2] (2012) S211-S214.
  •  
  • 21. G.S. Krishnan, L.G. Babu, R. Pradhan and S. Kumar, Mater. Res. Express. 7[1] (2019) 015102.
  •  
  • 22. E.N. Obika, C.H. Achebe, J.L. Chukwuneke, O.N. Ezenwa, Adv. Mech. Eng. 12[7] (2020) p.1687814020947611
  •  

This Article

  • 2021; 22(6): 731-738

    Published on Dec 31, 2021

  • 10.36410/jcpr.2021.22.6.731
  • Received on Sep 13, 2021
  • Revised on Oct 6, 2021
  • Accepted on Oct 9, 2021

Correspondence to

  • Thirumalai Ramanathan

  • Professor, Mechanical Engineering, Dr.N.G.P. Institute of Technology, Coimbatore, India
    Tel : +91 9843240635

  • E-mail: vkrthirumalai@gmail.com