Articles
  • Optimization and analysis of microstructural friction stir welded AA5083 grade aluminium alloy

  • P. Muthurasua,* and M. Kathiresanb

  • aLecturer, Department of Mechanical Engineering, Government Polytechnic College, Tuticorin- 628 008.
    bProfessor, Department of Mechanical Engineering, E.G.S. Pillay Engineering College, Nagapattinam - 611002

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. E. Taban and E. Kaluc, Met. Mater. 44 (2006) 24.
  •  
  • 2. S. Ji, R. Huang, X. Meng, L. Zhang, and Y. Huang, J. Mater. Eng. Perform. 26 (2017) 2359 -2367.
  •  
  • 3. A. Abdolahzadeh, H. Omidvar, M.A. Safarkhanian, and M. Bahrami, Int. J. Adv. Manuf. Technol. 75 (2014) 1189- 1196.
  •  
  • 4. W.B. Lee, Y.M. Yeo, and S.B. Jung, Scripta. Mater. 49 (2003) 423-428.
  •  
  • 5. Y. Li, L.E. Murr, and J.C. McClure, Mater. Sci. Eng. A 271 (1999) 213-223.
  •  
  • 6. H.M. Rao, B. Ghaffari, W. Yuan, J.B. Jordon, and H. Badarinarayan, Mater. Sci. Eng. A 651 (2016) 27-36.
  •  
  • 7. P. Cavaliere, Proced. CIRP 11 (2013) 139-144.
  •  
  • 8. H. Khodaverdizadeh, A. Mahmoudi, A. Heidarzadeh and E. Nazari, Mater. Des. 35 (2012) 330-334.
  •  
  • 9. N.D. Ghetiya, K.M. Patel, and A.J. Kavar, T. Indian I Metals 69 (2016) 917-923.
  •  
  • 10. S. Kasman, Int. J. Adv. Manuf. Tech. 68 (2013) 795-804.
  •  
  • 11. M. Koilraj, V. Sundareswaran, S. Vijayan, and S. Koteswara Rao, Mat. & Des. 42 (2012) 1-7.
  •  
  • 12. M.H. Shojaeefard, M. Akbari, A. Khalkhali, P. Asadi, and A.H. Parivar, Mat. & Des. 64 (2014) 660-666.
  •  
  • 13. M. Ravichandran, M. Thirunavukkarasu, S. Sathish, and V. Anandakrishnan, Mater. Test. 58 (2016) 206-210.
  •  
  • 14. M. Kimura, M. Choji, M. Kusaakal, K. Seo, and A. Fuji, J. of Sci. Tech. of Weld. & Joi. 11[2] (2006) 209-215.
  •  
  • 15. P.-h. Geng, G.-l. Qin, J. Zhou, and C.-a. Li, Trans. Nonfer. Met. Soc. China 29 (2019) 2483-2495.
  •  
  • 16. B. Hari Babu and K. Madhivanan, Int. J. Adv. Res. Trends Eng. Tech. 2 (2015) 78-83.
  •  
  • 17. P. Cavaliere, A. De Santis, F. Panella, and A. Squillace, Mater. Des. 30 (2009) 609-16.
  •  
  • 18. S. Vijayan, R. Raju, K. Subbaiah, N. Sridhar, and S.R.K. Rao, Exp Tech. 34[5] (2010) 37-44.
  •  
  • 19. S. Vijayan, R. Raju, and S.R.K. Rao, Mater. Manuf. Proc. 25[11] (2010) 1206-12.
  •  
  • 20. K.V. Jata and S.L. Semiatin, Scripta. Mater. 43 (2000) 743-749.
  •  
  • 21. J. Gao and D.J. Quesnel, Metall. Mater. Trans. A 42 (2011) 356-364.
  •  
  • 22. Z. Zhang, X. Yang, J. Zhang, G. Zhou, X. Xu, and B. Zou, Mater. Des. 32 (2011) 4461-70.
  •  
  • 23. R. Pandiyarajan and M. P. Prabakaran, J. Ceram. Process. Res. 21[6] (2020) 690-698.
  •  
  • 24. P. Gopi Krishnan, B. Suresh Babu, and K. Siva, J. Ceram. Process. Res. 21[2] (2020) 157-163.
  •  
  • 25. R. Srinivasan, B. Suresh Babu, P. Prathap, Ruban Whenish, R. Soundararajan, and G. Chandramohan, J. Ceram. Process. Res. 22[1] (2021) 16-24.
  •  
  • 26. B. Suresh Babu, G. Chandramohan, C. Boopathi, T. Pridhar, and R. Srinivasan, J. Ceram. Process. Res. 19[1] (2018) 69-74.
  •  
  • 27. H. Sonomura, T. Ozaki, K. Katagiri, Y. Hasegawa, T. Tanaka, and A. Kakitsuji, Ceram. Int. 46[6] (2020) 7654-7658.
  •  
  • 28. M. Sabbaghian, M. Shamanian, H.R. Akramifard, and M. Esmailzadeh, Ceram. Int. 40[8] (2014) 12969-12976.
  •  

This Article

  • 2021; 22(6): 697-704

    Published on Dec 31, 2021

  • 10.36410/jcpr.2021.22.6.697
  • Received on Jul 31, 2021
  • Revised on Oct 20, 2021
  • Accepted on Oct 30, 2021

Correspondence to

  • P. Muthurasu

  • Lecturer, Department of Mechanical Engineering, Government Polytechnic College, Tuticorin- 628 008.
    Tel : +91 944 253 3052

  • E-mail: pm.rasu@gmail.com