Articles
  • Investigations on properties of ceno PCM produced via sonication process for thermal comfort building
  • R. Greesana,*, C. Mekalab and M. Ravichandranc

  • aDepartment of Civil Engineering, MahathAmma Institute of Engineering & Technology, Pudukkottai, 622005, Tamil Nadu, India
    bSubject Matter Expert, Civil Engineering, Edu Tech Department, Larsen and Toubro Ltd, Chennai, 600089, Tamil Nadu, India
    cDepartment of Mechanical Engineering, K.Ramakrishnan College of Engineering, Trichy, 621 112, Tamil Nadu, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Z. Zhai, M.L.L. Abarr, S.N.J. Al-Saleh, and P. Yate, J. Archit. Eng. 20[4] (2014) 814-824.
  •  
  • 2. S. Chadhurvedi, in Proceedings of the 2008 Architectural Engineering Conference (AEI), September 2008, edited by M. Ettouney (ASCE Press, 2008) p.181.
  •  
  • 3. T. Ling and C.S. Poon, J. Constr. Build. Mater. 46 (2013) 55-62.
  •  
  • 4. M. Delgado, A. Lázaro, J. Mazo, and B. Zalba, Renew. Sust. Ener. Rev. 16[1] (2012) 253-273
  •  
  • 5. Y. Zhang, G. Zhouz, K. Linz Q. Zhang, and H. Di, J. Build. Environ. 42 (2007) 2197-2209.
  •  
  • 6. N. Zhu, Z. Ma, and S. Wang, J. Energy Convers. Manag. 50 (2009) 3169-3181.
  •  
  • 7. A. Waqas and Z.U. Din, J. Renew. Sust. Energ. Rev. 18 (2013) 607-625.
  •  
  • 8. K. Biswas, J. Lu, P. Soroushian, and S. Shrestha, J. Appl. Ener. 131 (2014) 517-529.
  •  
  • 9. V.V. Tyagi, S.C. Kaushik, S.K. Tyagi, and T. Akiyama, J. Renew. Sust. Ener. Rev. 15 (2011) 1373-1391.
  •  
  • 10. C.Y. Zhao and G.H. Zhang, J. Renew. Sust. Energ. Rev. 15[8] (2011) 3813-3832.
  •  
  • 11. Y. Ozonur, M. Mazman, H.O. Paksoy, and H. Evliya, Int. J. Ener. Res. 30[10] (2006) 741-749.
  •  
  • 12. M.V. Pankova, E.V. Fomenko, N.N. Anshits, T.A. Vershchagina, and A.G. Anshits, J. Chem. Sust. Develop. 18 (2010) 509-516.
  •  
  • 13. V.V. Tyagi and D. Buddhi, J. Renew. Sust. Energ. Rev. 11 (2007) 1146-66.
  •  
  • 14. L.F. Cabeza, A. Castell, C. Barreneche, A. de Gracia, and A.I. Fernández, J. Renew. Sust. Energ. Rev. 15 (2011) 1675-1695.
  •  
  • 15. K. Kolay and S. Bhusal, J. Fuel 117 (2014) 118-124.
  •  
  • 16. A. Gharsallaoui, G. Roudaut, O. Chambin, A. Voilley, and R. Saurel, J. Food Res. Int. 40[9] (2007) 1107-1121.
  •  
  • 17. T. Khadiran, M.Z. Hussein, Z. Zainal, and R. Rusli, J. Solar Energ. Mater.Solar Cells 143 (2015) 78-98.
  •  
  • 18. C. Voelker, O. Kornadt, and M. Ostry, J. Energ. Build.40[5] (2008) 937-944.
  •  
  • 19. A.F. Regin, S.C. Solanki, and J.S. Saini, J. Renew. Sust. Energ. Rev 12 (2008) 2438-56.
  •  
  • 20. F. Liu, J. Wang, and X. Qian, J. Cem. Concr. Compos. 80 (2017) 317-325.
  •  

This Article

  • 2021; 22(6): 642-648

    Published on Dec 31, 2021

  • 10.36410/jcpr.2021.22.6.642
  • Received on Apr 29, 2021
  • Revised on Aug 4, 2021
  • Accepted on Aug 28, 2021

Correspondence to

  • R. Greesan
  • Department of Civil Engineering, MahathAmma Institute of Engineering & Technology, Pudukkottai, 622005, Tamil Nadu, India
    Tel : +91- 9894686916

  • E-mail: greesan.ram@gmail.com