Articles
  • Taguchi GRA optimization of stir casting parameters in Al-SiC composite

  • T. Tamilanbana,*, T. S. Ravikumarb, C. Gopinathc and S. Senthilrajand

  • a,bDepartment of Mechanical Engineering, Hindustan Institute of Technology and Science, Chennai 603103, India
    cDepartment of Mechanical Engineering, St.Joseph College of Engineering, Chennai 602117, India
    dDepartment of Mechanical Engineering, A.V.C College of Engineering, Mannampandal 609305, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. A. Kamboj, S. Kumar, and H. Singh, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 227 (2013) 1777-1787.
  •  
  • 2. V. Vijayakumar, P. Johnson, R. Whenish, A.J. Rajan, and V.H. Wilson, J. Ceram. Process. Res. 22 (2021).
  •  
  • 3. S. Soltani, R. Azari Khosroshahi, R. Taherzadeh Mousavian, Z.Y. Jiang, A. Fadavi Boostani, and D. Brabazon, Rare Met. 36 (2017) 581-590.
  •  
  • 4. C. Rajaravi, B. Gobalakrishnan, and P.R. Lakshminarayanan, J. Mech. Behav. Mater. 28 (2019) 162-168.
  •  
  • 5. L. Geng, H.W. Zhang, H.Z. Li, L.N. Guan, and L.J. Huang, Trans. Nonferrous Met. Soc. China 20[10] (2010) 1851-1855.
  •  
  • 6. G. Singh, N. Sharma, S. Goyal, and R.C. Sharma, Met. Mater. Int. 27 (2021) 4333-4345.
  •  
  • 7. S.B. Prabu, L. Karunamoorthy, S. Kathiresan, and B. Mohan, J. Mater. Process. Technol. 171 (2006) 268-273.
  •  
  • 8. J. Deng, J. Grey Syst. 68 (1988) 1-24.
  •  
  • 9. P.A. Sylajakumari, R. Ramakrishnasamy, and G. Palaniappan, Materials (Basel). 11 (2018) 1-17.
  •  
  • 10. P. Muthu, Manufacturing Rev. 7 (2020) 16.
  •  
  • 11. F. Puh, Z. Jurkovic, M. Perinic, M. Brezocnik, and S. Buljan, Teh. Vjesn. 23 (2016) 377-382.
  •  
  • 12. N. Kaushik and S. Singhal, Cogent Eng. 5[1] (2018) 1467196.
  •  
  • 13. G.S. Prayogo and N. Lusi, AIP Conf. Proc. 1725 (2016) 020061.
  •  
  • 14. H. Pervez, M.S. Mozumder, and A.H.I. Mourad, Materials (Basel). 9 (2016) 10-13.
  •  
  • 15. M. Uthayakumar, S.T. Kumaran, and S. Aravindan, Adv. Tribol. 2013 (2013) 365602.
  •  
  • 16. M.T. Azhagan and B. Mohan, J. Ceram. Process. Res. 22 (2021) 470-474.
  •  
  • 17. C. Chanakyan and S. Sivasankar, J. Ceram. Process. Res. 21 (2020) 647-655.
  •  
  • 18. Y.C. Lin, J.C. Hung, H.M. Chow, and A.C. Wang, J. Ceram. Process. Res. 16 (2015) 249-257.
  •  
  • 19. S. Paul and K. Kurian, Int. J. Mod. Engg. Res. 5 (2015) 43-49.
  •  
  • 20. M.C. Senel, M. Gurbuz, and E. Koc, Compos. Part B Eng. 154 (2018) 1-9.
  •  

This Article

  • 2021; 22(6): 629-635

    Published on Dec 31, 2021

  • 10.36410/jcpr.2021.22.6.629
  • Received on Aug 14, 2021
  • Revised on Sep 28, 2021
  • Accepted on Oct 2, 2021

Correspondence to

  • T. Tamilanban

  • Department of Mechanical Engineering, Hindustan Institute of Technology and Science, Chennai 603103, India
    Tel : +91 9841207286

  • E-mail: ttamilraju@gmail.com