Articles
  • Parametric optimization in squeeze casting of AA6061- Si3N4 composites using Taguchi method

  • M Thirumal Azhagana,* and B Mohanb

  • aDepartment of Production Technology, MIT Campus, Anna University, India 600044
    bDepartment of Mechanical Engineering, CEG Campus, Anna University, India 600025

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. B.-K. Hwu, S.-J. Lin, and M.-T. Jahn, Mat. Sci. Eng. A 206[1] (1996) 110-119.
  •  
  • 2. X.N. Zhang, L. Geng, and G.S., Wang, J. Mater. Process. Tech. 176[1-3] (2006) 146-151.
  •  
  • 3. M.R. Ghomashchi and A. Vikhrov, J. Mater. Process. Tech. 101[1-3] (2000) 1-9.
  •  
  • 4. P. Vijian and V.P. Arunachalam, J. Mater. Process. Tech. 170[1-2] (2005) 32-36.
  •  
  • 5. S.M. Skolianos, G. Kiourtsidis, and T. Xatzifotiou, Mat. Sci. Eng. A 231[1-2] (1997) 17-24.
  •  
  • 6. K. Sukumaran, K.K. Ravikumar, S.G.K. Pillai, T.P.D. Rajan, M. Ravi, R.M. Pillai, and B.C. Pai, Mat. Sci. Eng. A 490[1-2] (2008) 235-241.
  •  
  • 7. M.T. Azhagan, B. Mohan, and A. Rajadurai, Appl. Mech. Mater. 541- 542 (2014) 349-353.
  •  
  • 8. M.T. Azhagan, B. Mohan, and A. Rajadurai, IJET 6[1] (2014) 183-189.
  •  
  • 9. P. Vijian and V.P. Arunachalam, Int. J. Adv. Manuf. Tech. 33[11-12] (2007) 1122-1127.
  •  
  • 10. M. Thirumal Azhagan, B. Mohan, and A. Rajadurai, Appl. Mech. Mater. 766-767 (2015) 422-426.
  •  
  • 11. P. Vijian and V.P. Arunchalam, J. Mater. Process. Tech. 180[1-3] (2006) 161-166.
  •  
  • 12. P. Senthil and K.S. Amirthagadeswaran, J. Mech. Sci. Technol. 26[4] (2012) 1141-1147.
  •  
  • 13. P. Vijian and V.P. Arunachalam, J. Mater. Process. Tech. 186[1-3] (2007) 82-86.
  •  
  • 14. M. Bangaru, T.A. Murugan, and R. Arunachalam, in Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition IMECE, November 2015, edited by ASME (ASME, 2015) p.1-8.
  •  
  • 15. M.T. Azhagan and B. Mohan, Mater. Today: Proc. 28 (2020) 931-935.
  •  
  • 16. P. Senthil and K.S. Amirthagadeswaran, Arab. J. Sci. Eng. 39[3] (2014) 2215-2225.
  •  
  • 17. A. Onat, H. Akbulut, and F. Yilmaz, J. Alloy. Compd. 436[1-2] (2007) 375-382.
  •  
  • 18. L. Poovazhagan, K. Kalaichelvan, and A. Rajadurai, Trans. Indians. Inst. Met. 67[2] (2014) 229-237.
  •  
  • 19. G.C.M. Patel, A.K. Shettigar, and M.B. Parappagoudar, J. Manuf. Process. 32 (2018) 199-212.
  •  
  • 20. W. Jianga, J. Zhua, G. Li, F. Guan, Y. Yu, and Z. Fan, J. Mater. Sci. Technol. 88 (2021) 119-131.
  •  
  • 21. M. Lakshmanan, J. SelwinRajadurai, V. Chakkravarthy, and S. Rajakarunakaran, Mater. Lett. 285 (2021) 1-4.
  •  
  • 22. A. Gnanavelbabu, K.T.S. Surendran, P. Loganathan, and E. Vinothkumar, J. Alloy. Compd. 856 (2021) 158-173.
  •  
  • 23. J. Zhu, W. Jiang, G. Li, F. Guan, Y. Yu, and Z. Fan, J. Mater. Process. Tech. 283 (2020) 1-11.
  •  
  • 24. Y.-C. Lin, J.-C. Hung, H.-M. Chow, and A-C. Wang, J. Ceram. Process. Res. 16[2] (2015) 249-257.
  •  

This Article

  • 2021; 22(4): 470-474

    Published on Aug 31, 2021

  • 10.36410/jcpr.2021.22.4.470
  • Received on Feb 2, 2021
  • Revised on Mar 29, 2021
  • Accepted on Apr 19, 2021

Correspondence to

  • M Thirumal Azhagan

  • Department of Production Technology, MIT Campus, Anna University, India 600044
    Tel : +91 9962593286

  • E-mail: thirumalazhaganm@gmail.com, E-mail: thirumalazhag