Articles
  • Investigations into microstructure and mechanical properties of Al 6061/SiCp metal matrix composite spur gear produced via powder metallurgy

  • V. Vijayakumara,*, Pradeep Johnsonb, Ruban Whenishc, A. John Rajand and Vincent H Wilsone

  • aAssistant Professor, Department of Mechanical Engineering, PSG college of Technology, Coimbatore 641004, India
    bAssistant Professor, Department of Mechatronics Engineering, Hindusthan College of Engineering and Technology, Coimbatore 641032, India
    cApplication Engineer, Manna Chemicals & Drugs Private Limited, Chennai 600037, India
    dProfessor, Department of Manufacturing Engineering, School of Mechanical Engineering, Vellore Institute of Technology, Vellore 632014, India
    eProfessor, Department of Technology Management, School of Mechanical Engineering, Vellore Institute of Technology, Vellore 632014, India

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. A. Slipenyuk, V.Kuprin, Y. Milman, V. Goncharuk, and J. Eckert, Acta Materi 54[1] (2006) 157-166.
  •  
  • 2. H.M. Zakaria, Ain Shams Eng. Jour. 5[3] (2014) 831-838.
  •  
  • 3. H. Wang, R. Zhang, X. Hu, C.-A. Wang, and Y. Huang, J. Mater. Proc. Tech. 197[1-3] (2008) 43-48.
  •  
  • 4. V. Jeevan, C.S.P. Rao, and Selvaraj, Inter. J. Mech. Eng. and Tech. 3[3] (2012) 565-573.
  •  
  • 5. S. Scudino, K.B. Surreddi, S. Sager, M. Sakaliyska, J.S. Kim, W. Löser, and J. Eckert. J. Mater. Sci. 43[13] (2008) 4518-4526.
  •  
  • 6. B. Kianian and C. Andersson, in Proceedings of the International Conference on Gears, (VDI Verlag GMBH, 2017) p. 1251.
  •  
  • 7. D.R. Kumar, C. Loganathan, and R. Narayanasamy, Mater. Des. 32[4] (2011) 2413-2422.
  •  
  • 8. V. Vijayakumar and S. Mouleeswaran, Adv. Nat. Appl. Sci. 10[7] (2016) 130.
  •  
  • 9. V. Vijayakumar and M.S. Kumar, Adv. Nat. Appl. Sci. 10[7] (2016) 141.
  •  
  • 10. B. Leszczynska-Madej, Archi. Metal. Mater. 58[1] (2013) 43-48.
  •  
  • 11. P. Ravindran, K. Manisekar, P. Rathika, and P. Narayanasamy, Mater. Des. 45 (2013) 561-570.
  •  
  • 12. A. Gokce and F. Findik, J. Achie, Mater. Manuf. Eng. 30[2] (2008) 157-164.
  •  
  • 13. P.B. Pawar and A. Abhay Utpat, Mate. Today: Procee. 2[4-5] (2015) 2968-2974.
  •  
  • 14. Sánchez, B Miryam, Miguel Pleguezuelos, and Jos I. Pedrero, Mechanism and Machi. Theo, 95 (2016) 102-113.
  •  
  • 15. Y.-G. Yang, J.-Y. Kwak, H. Kong, and S.-J. Lee, J. Ceram. Process. Res. 21[4] (2020) 450-455.
  •  
  • 16. A. Noviyanto, A. Wibowo, G. Sukmarani, R. Kusumaningrum, F. Fauzi, A.M. Habie, M.I. Amal, and N.T. Rochman, J. Ceram. Process. Res. 21[3] (2020) 326-330.
  •  
  • 17. R. Whenish, B. Sureshbabu, A. Johnrajan, R. Srinivasan, S.N. Kumar, A. Kavitharan, C. Pandikrishna, and S. Ragupathi, IOP Conf. Ser.: Mater. Sci. Eng. 988 (2020) 012063.
  •  
  • 18. J. Hua, Q. Huanga, H. Penga, X. Tian, Z. Chen, and Y. Peng, J. Ceram. Process. Res. 19[3] (2018) 224-230.
  •  
  • 19. K.K. Alaneme and E.A. Okotete, J. Sci.: Ad. Mat. Dev. 4[1] (2019) 19-33.
  •  
  • 20. M. Meignanamoorthy and M. Ravichandran, Mech. Engineering 22[1] (2020) 65-76.
  •  
  • 21. Kumar, S.J. Niteesh, R. Keshavamurthy, M.R. Haseebuddin, and P.G. Koppad, Trans. Ind. Inst. Met. 70[3] (2017) 605-613.
  •  
  • 22. R. Srinivasan, B.S. Babu, P. Prathap, R. Whenish, R. Soundararajan, and G. Chandramohan, J. Ceram. Process. Res. 22[1] (2021) 16-24.
  •  

This Article

  • 2021; 22(4): 401-408

    Published on Aug 31, 2021

  • 10.36410/jcpr.2021.22.4.401
  • Received on Oct 23, 2020
  • Revised on Jan 1, 2021
  • Accepted on Feb 5, 2021

Correspondence to

  • V. Vijayakumar

  • Assistant Professor, Department of Mechanical Engineering, PSG college of Technology, Coimbatore 641004, India
    Tel : +91-9842576766

  • E-mail: mechviji2010@gmail.com