Articles
  • The effect of transition metal oxide doping on the sintering behaviour of yttria-stabilised tetragonal zirconia 

  • H.C. Alexander Cheea, R.S.K. Singha,b and K.Y. Sara Leec,*

  • aFaculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia
    bFaculty of Engineering, Universiti Teknologi Brunei, Tungku Highway, Gadong BE1410, Brunei Darussalam
    cTunku Abdul Rahman University College, Faculty of Engineering & Technology, Department of Mechanical Engineering, 53300, Kuala Lumpur, Malaysia

References
  • 1. R.C. Garvie, R.H. Hannink, and R.T. Pascoe, Nature 258 (1975) 703-704.
  •  
  • 2. I. Birkby, and H. Hodgson, Proceedings of the 3rd European Symposium on Engineering Ceramics, edited by F.L. Riley (Elsevier Applied Science, Ltd., 1991) p.167.
  •  
  • 3. M. Xue, S. Liu, X. Wang, and K. Jiang, Mater. Chem. Phys. 244 (2020) 122693.
  •  
  • 4. K. Kobayashi, H. Kuwajima, and T. Masaki, Solid State Ionics 3-4 (1981) 489-493.
  •  
  • 5. S. Ramesh, and C. Gill, Ceram. Int. 27 (2001) 705-711.
  •  
  • 6. J. Chevalier, S. Deville, E. Münch, R. Jullian, and F. Lair, Biomater. 25 (2004) 5539-5545.
  •  
  • 7. S. Ramesh, K.Y. Sara Lee, and C.Y. Tan, Ceram. Inter. 44 (2018) 20620-20634.
  •  
  • 8. M. Cattani-Lorente, S. Durual, M. Amez-Droz, H.W.A. Wiskott, and S.S. Scherrer, Dent. Mater. 32 (2016) 394-402.
  •  
  • 9. T. Sato, and M. Shimada, J. Am. Ceram. Soc., 68 (1985) 356-356.
  •  
  • 10. G.K.R. Pereira, M. Amaral, P.F. Cesar, M.C. Bottino, C.J. Kleverlaan, and L.F. Valandro, J. Mech. Behav. Biomed. Mater. 45 (2015) 183-192.
  •  
  • 11. H.Y. Lu, H.Y. Lin, and S.Y. Chen, Ceram Int, 13 (1987) 207-214.
  •  
  • 12. S. Lawson, and P.A. Smith, J. Am. Ceram. Soc. 76 (1993) 3170-3172.
  •  
  • 13. L. Gremillard, J. Chevalier, T. Epicier, S. Deville, and G. Fantozzi, J. Eur. Ceram. Soc. 24 (2004) 3483-3489.
  •  
  • 14. M. Cattani-Lorente, S.S. Scherrer, P. Ammann, M. Jobin, and H.W.A. Wiskott, Acta Biomater. 7 (2011) 858-865.
  •  
  • 15. M. Keuper, K. Eder, C. Berthold, and K.G. Nickel, Acta Biomater. 9 (2013) 4826-4835.
  •  
  • 16. C.H. Ting, S. Ramesh, N. Lwin and U. Sutharsini, J. Ceram. Proc. Res. 17 (2016) 1265-1269.
  •  
  • 17. L. Hallmann, P. Ulmer, E. Reusser, M. Louvel, and C.H.F. Hämmerle, J. Eur. Ceram. Soc. 32 (2012) 4091-4104.
  •  
  • 18. S.M. Kwa, S. Ramesh, L.T. Bang, Y.H. Wong, W.J. Kelvin Chew, C.Y. Tan, J. Purbolaksono, H. Misran, and W.D. Teng, J. Ceram Proc. Res. 16 (2015) 193-198.
  •  
  • 19. F. Zhang, K. Vanmeensel, M. Inokoshi, M. Batuk, J. Hadermann, B. Van Meerbeek, I. Naert, and J. Vleugels, J. Eur. Ceram. Soc. 34 (2014) 2453-2463.
  •  
  • 20. K. Eltayeb, W. Hong, F. Chen, Y.-H. Han, Q. Shen, and L. Zhang, J. Ceram. Proc. Res. 18 (2017) 1-9.
  •  
  • 21. X. Hu, X. Jiang, S. Chen, Q. Zhu, M. Feng, P. Zhang, J. Fan, B. Jiang, X. Mao, and L. Zhang, Ceram Int. 44 (2018) 2093-2097.
  •  
  • 22. N. Obradović, and F. Kern, Ceram. Int. 44 (2018) 16931-16936.
  •  
  • 23. H. Guo, T.J.M. Bayer, J. Guo, A. Baker, and C.A. Randall, Scripta Materialia 136 (2017) 141-148
  •  
  • 24. Y. Wang, H. Huang, L. Gao, and F. Zhang, J. Ceram. Proc. Res. 12 (2011) 473-476.
  •  
  • 25. S. Ramesh, N. Zulkifli, C.Y. Tan, Y.H. Wong, F. Tarlochan, S. Ramesh, W.D. Teng, I.Sopyan, L.T. Bang, and A.A.D. Sarhan, Ceram. Int. 44 (2018) 8922-8927.
  •  
  • 26. F. Chen, J.-M. Wu, H.-Q. Wu, Y. Chen, C.-H. Li, and Y.-S. Shi, Int. J. Lightweight Mater. Manuf. 1 (2018) 239-245.
  •  
  • 27. Z. Wu, N. Li, C. Jian, W. Zhao, and J. Yan, Ceram. Int. 39 (2013) 7199-7204.
  •  
  • 28. S. Ramesh, S. Meenaloshini, C.Y. Tan, W.J.K. Chew, and W.D. Teng, Ceram. Int. 34 (2008) 1603-1608.
  •  
  • 29. L. Holz, J. Macias, N. Vitorino, A.J.S. Fernandes, F.M. Costa, and M.M. Almeida, Ceram. Int. 44 (2018) 17962-17971.
  •  
  • 30. A. Samodurova, A. Kocjan, M.V. Swain, and T. Kosmač, Acta Biomater. 11 (2015) 477-487.
  •  
  • 31. Z. Feng, J. Qi, X. Guo, Y. Wang, X. Cao, Y. Yu, C. Meng, and T. Lu, J. Alloys Comp. 787 (2019) 254-259.
  •  
  • 32. S.S. Mishra, D. Chaira, and S.K. Karak, Ceram. Int. 45 (2019) 20555-20565.
  •  
  • 33. L. Fu, H. Engqvist, and W. Xia, J. Eur. Ceram. Soc. 38 (2018) 2110-2119.
  •  
  • 34. H. Toraya, M. Yoshimura, and S. Somiya, J. Am. Ceram. Soc. 67 (1984) C-119-C-121.
  •  
  • 35. M.I. Mendelson, J. Am. Ceram. Soc. 52 (1969) 443-446.
  •  
  • 36. L. Lemaire, S. M. Scholz, P. Bowen, J. Dutta, H. Hofmeister, and H. Hofmann, J. Mater. Sci. 34 (1999) 2207-2215.
  •  
  • 37. M.M. Khan, S. Ramesh, L.T. Bang, Y.H. Wong, S. Ubenthiran, C.Y. Tan, J. Purbolaksono, and H. Misran, J. Mater. Eng. and Perform. 23 (2014) 4328-4335.
  •  
  • 38. H.R. Pasaribu K.M. Reuver, D.J. Schipper, S. Ran, K.W. Wiratha, A.J.A. Winnubst, and D.H.A. Blank, Inter. J. Refractory Metals & Hard Mater. 23 (2005) 386-390.
  •  
  • 39. A.A. Menaze, A.M. Mostafa, and E.A. Al-Ashkar, Optical Mater. 100 (2020) 109663.
  •  
  • 40. P. Mahmoudi, A. Nemati, and M.M. Shahraki, J. Alloys Comp. 770 (2019) 784-791.
  •  
  • 41. B.H. Watson III, M.J. Brova, Y. Chang, S.T. Misture, M.A. Fanton, R.J. Meyer Jr., and G.L. Messing, J. Eur. Ceram. Soc. 39 (2019) 4719-4726.
  •  
  • 42. S. Shimada, K. Kodaira, and T. Matsushita, J. Mater. Sci. 19 (1984) 1385-1390.
  •  
  • 43. D.L. Corker, R.W. Whatmore, E. Ringgaard, and W.W. Wolny, J. Eur. Ceram. Soc. 20 (2000) 2039-2045.
  •  
  • 44. Y.H. Kim, H. Ryu, Y.-K. Cho, H.-J. Lee, and S. Nahm, J. Am. Ceram. Soc. 96 (2013) 312-317.
  •  
  • 45. T. Zhang, P. Hing, H. Huang, and J. Kilner, Mater. Lett. 57 (2002) 507-512.
  •  
  • 46. N. Kimura, S. Abe, Y. Hayashi, J. Morishita, and H. Okamura, Sprechsaal 122 (1989) 341-343.
  •  
  • 47. Y. Sakka, T. Ishii, T.S. Suzuki, K. Morita, and K. Hiraga, J. Eur. Ceram. Soc., 24 (2004) 449-453.
  •  
  • 48. J. Nie, J.M. Chan, M. Qin, N. Zhou, and J. Luo, Acta Materialia 130 (2017) 329-338.
  •  
  • 49. J.H. Kim, D.S. Kim, S.H. Han, H-W. Kang, H.-G. Lee, J.S. Kim, and C.I. Cheon, Mater. Letts. 241 (2019) 202-205.
  •  
  • 50. Q. Lü, X. Dong, Z. Zhu, and Y. Dong, Ceram. Int. 40 (2014) 15545-15550.
  •  

This Article

  • 2020; 21(4): 495-500

    Published on Aug 30, 2020

  • 10.36410/jcpr.2020.21.4.495
  • Received on Mar 2, 2020
  • Revised on Apr 7, 2020
  • Accepted on Apr 14, 2020

Correspondence to

  • K.Y. Sara Lee

  • Tunku Abdul Rahman University College, Faculty of Engineering & Technology, Department of Mechanical Engineering, 53300, Kuala Lumpur, Malaysia
    Tel : +(6)03-41450123
    Fax: +(6)03-41423166

  • E-mail: leeky@tarc.edu.my