Articles
  • The electrical properties of phosphors for plasma display panels 
  • Hyeong-Jun Kima,*, Young Kwan Kimb, Ahreum Jungc and Sung-Churl Choic
  • a Korea Institute of Ceramic Eng. & Tech., 30 Gyongchung Rd., Shindun-myeon, Icheon-Si, Gyeonggi-do, 467-843, South Korea b PDP Division, Samsung SDI Co., LTD, 508 Sungsung-dong, Cheonan-si, Chungcheongnam-do, 330-300, South Korea c Division of Materials Science & Engineering, College of Engineering Hanyang University 17 Haengdang-dong, Seongdongku, Seoul 133-791, South Korea
Abstract
The electric properties of porous phosphor layers for plasma display panels were studied which generated typical RGB colors from vacuum ultraviolet light; red is (YGd)BO(3) : Eu(3+)(YGB), green is Zn(2)SiO(4): Mn(2+) (ZSM), and blue is BaMgAl(10)O(17) : Eu(2+) (BAM). Because the phosphors were not fully packed in cells of a plasma display panel (PDP), their electrical properties were measured using all appearance density of approximately 60%. There was only a slight difference in the dielectric constants of the RGB phosphors; however, the dielectric loss of the green phosphor was much larger than that of either the blue or red phosphors. The volumetric resistivity of the powders had increasingly lower,er values according to the emission wavelengths of the phosphors.

Keywords: Phosphor; dielectric constant; conductivity; PDP

This Article

  • 2010; 11(1): 11-14

    Published on Feb 28, 2010

Correspondence to

  • E-mail: