Articles
  • Microstructure and mechanical properties of B4C-TiB2 ceramic composites hot pressed with in-situ reaction
  • P. Švec*, Z. Gábrišová and A. Brusilová
  • Institute of Technologies and Materials, Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Pionierska 15, 831 02 Bratislava, Slovak Republic
Abstract
Ceramic composite materials consisting of a boron carbide (B4C) matrix and titanium diboride (TiB2) secondary phase were in-situ manufactured via chemical reaction of B4C and titanium diboride (TiO2) during hot pressing at a temperature of 1850 °C under a pressure of 35 MPa for 60 min in a vacuum atmosphere. The TiO2 addition has a positive effect on both densification of B4C-TiB2 ceramic composites and portion of TiB2 secondary phase. When adding 10 to 50 wt.% TiO2 to B4C, sintered densities increased from 92.1 to 99.5% and portion of TiB2 secondary phase increased from 3.9 to 40.2 vol.%. When increasing the TiB2 portion to its maximal value, the fracture toughness of the composite reached the maximal value of 7.51 MPa.m1/2. The hardness of B4C-TiB2 composite improved when increasing the portion of TiB2 phase only up to the value of 29.7 vol.% when it reached the average value of 29.8 GPa.

Keywords: Ceramic composite, Boron carbide, Titanium diboride, Hot pressing, In-situ reaction

This Article

  • 2019; 20(1): 113-120

    Published on Feb 28, 2019

Correspondence to

  • E-mail: