Articles
  • An XPS study of titanium-chromium nitride (Ti,Cr)N nanopowder prepared by heat treatment in flowing nitrogen gas
  • Kyungsun Songa, Chang-Yul Suha, Sung-Wook Choa, Jong-Seong Baeb, In-Jin Shonc and Wonbaek Kima,*
  • a Korea Institute of Geoscience & Mineral Resources (KIGAM), Gwahang-no 92, Yuseong-gu, Daejeon, 305- 350, Korea b Busan Center, Korea Basic Science Institute (KBSI), Pusan National University Campus, 30 Jangjeon-dong, Geumjeong-gu, Busan 609-735, Korea c Division of Advanced Materials Engineering, Chonbuk National University, Chonbuk 561-756, Korea
Abstract
The electrical wire explosion of Cr-coated Ti wires produced nanosized particles consisting of various phases such as β(Ti,Cr), α-Ti, TiCr2 and TiN. The particles were heat treated at 800 οC ~ 1100 οC in flowing N2 gas in an effort to synthesize a ternary nitride, (Ti,Cr)N. An X-ray diffraction study revealed that they transformed to a single-phase (Ti,Cr)N during heating at 1100 οC for 1 h. An X-ray photoelectron spectroscopy (XPS) was used to examine the electronic configurations of Ti, Cr, and O after nitriding at various temperatures. After heating at 800 οC, the metallic Cr 2p peak vanished in accord with the disappearance of the β(Ti,Cr) phase confirmed by XRD. The inspection of XPS spectra suggested that the electronic configuration of (Ti,Cr)N is identical to that of TiN. The metal to nitrogen ((Ti + Cr) / N) ratio decreased with the nitriding temperature becoming 1 after heating at 1100 οC. XPS quantification revealed that the ternary nitride had the composition of (Ti0.6Cr0.4)N.

Keywords: TiN, CrN, (Ti,Cr)N, Wire explosion, XPS.

This Article

  • 2012; 13(3): 231-234

Correspondence to

  • E-mail: