Articles
  • Characteristics of La0.8Sr0.2Ga(0.8x)Mg0.2O3−δ (x = 0.85, 0.9, 0.95, 1) electrolytes formed from powders prepared by spray pyrolysis
  • Dae Soo Junga, Jung Hyun Kima, Hye Young Kooa, You Na Koa, Yoon Ho Chob, Jong-Heun Leeb and Yun Chan Kanga,*
  • a Department of Chemical Engineering, Konkuk University, 1 Hwayang-dong, Gwangjin-gu, Seoul 143-701, Korea b Department of Materials Science and Engineering, Korea University, Anam-dong, Sungbuk-ku, Seoul 136-713, Korea
Abstract
La0.8Sr0.2Ga(0.8x)Mg0.2O3−δ (LSGM) (x = 0.85, 0.9, 0.95, 1) precursor powders were prepared by spray pyrolysis from spray solutions with various Ga contents. The pellets fired at 1400 °C had dense structures without pores, irrespective of the Ga content of the powders. The grain sizes of the pellets formed from powders with low Ga contents were larger than those of the pellets formed from powders with stoichiometric Ga contents. At firing temperatures of 1300 oC and 1400 oC, phase-pure LSGM pellets were obtained from powders with a stoichiometric amount of 85 at.% Ga (x = 0.85), as was evident from the results of crystal structure analysis. An orthorhombic–rhombohedral phase transition occurred in the pellets formed from powders with stoichiometric amounts of 95 at.% (x = 0.95), and 85 at.% (x = 0.85) Ga at a firing temperature of 1400 oC. The conductivities of LSGM with orthorhombic and rhombohedral structures sintered at 1400 oC were 0.007 S/cm and 0.022 S/cm, respectively, at a low measurement temperature of 600 oC.

Keywords: Spray pyrolysis, Solid electrolyte, Nano powder, Fuel cells.

This Article

  • 2011; 12(5): 572-577

    Published on Oct 31, 2011

Correspondence to

  • E-mail: